The newly developed multifunctional wire-stripper, the MultiCutter, unites several products or work operations in a single tool and thus simplifies electrical installation work. This new development stands out not merely because of its design, but also because of its easy handling and technical sophistication. The cutters are induction-hardened to 62 – 64 HRC and, in conjunction with the perfectly engineered joint, allow almost any material to be cut. Stripping standard wires, Ø 5 – 16 mm or 3 x 1.5 sq. mm to 5 x 1.5 sq. mm, is a quick and easy matter. Wires with a diameter of 5 mm are easily and professionally stripped. The new MultiCutter by NWS combines three tools or work steps in one; cut to length, remove the outer sheath and strip the wire insulation = quickly, easily and professionally.
1. Abschneiden – Kabel < Ø 11 mm, weicher Draht < Ø 6 mm, harter Draht < Ø 2 mm, induktiv gehärtete Schneiden
2. Abmanteln – Kabel Ø 5 – 16 mm, 3 x 1,5 qmm < 5 x 1,5 qmm
3. Abisolieren – Litzen < Ø 5 mm