30. srpnja 2017.
By Administrator

Automatic beveling machine for weld preparation – simple and secure handling with guide rails on both sides.

The KEYLESS quick change drill chucks are also called as Quick Lock Arbors especially in the USA. The KEYLESS quick change drill chucks for magnetic drilling machines are used to attached annular cutters and twist drills with Weldon shaft on the magnetic drilling machines’ arbor.

 

Advantages of the KEYLESS quick change drill chucks for magnetic drilling machines:

  • Can be used with any magnetic drilling machine, radial drilling machine or conventional drilling machine with Morse Taper 2 or 3.
  • No need for screwing to tighten the annular cutters.
  • Independent of screws makes the cutter to fix reliably.
  • Internal lubrication provided KEYLESS quick change drill chucks for magnetic drilling machines.
  • Save time in changing annular cutters.
  • Avoid accidents due to loosing of screws.
  • Avoid tool breakage.

How to use the KEYLESS quick change drill chucks for magnetic drilling machines:

 

how to use keyless drill chuck
Pull up the Keyless cap with one hand.
how to use keyless drill chuck
Stop at the top end and don’t release the hand.
With the other hand insert the annular cutter into the Keyless along with an ejector pin.
With the other hand insert the annular cutter into the Keyless along with an ejector pin.
Once the annular cutter is completely inside just soft release the hand from the Keyless cap.
Once the annular cutter is completely inside just soft release the hand from the Keyless cap.
Done! it takes in total 5 seconds to clamp the annular cutter in the Keyless drill chuck.
Done! it takes in total 5 seconds to clamp the annular cutter in the Keyless drill chuck.

Previous Article

Next Article

Odgovori

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)